Chemical Hazard Pictograms

Posted on by

USE “SEARCH” TAB ON the top right side FOR ALL INSTRUMENTATION RELATED TOPICS

nfpaHazard Pictograms  Can be Used to Convey Chemical Hazards

Many container labels will have diamond or a box that is divided into color coded sections: Health (blue), Flammability (Red), Reactivity (Yellow) and Other or Corrosive (white). Numbers of 0-4 will be assigned to each section of the diamond to indicate the degree of hazard; 0 indicates low hazard, and 4 is highest level of hazard.

 

For industrial safety related topics click on the links below

https://kishorekaruppaswamy.wordpress.com/2012/04/04/chemical-hazard-pictograms/

 

https://kishorekaruppaswamy.wordpress.com/2012/01/18/ingress-protection/

 

https://kishorekaruppaswamy.wordpress.com/2017/02/23/safety-integrity-level-sil/

 

https://kishorekaruppaswamy.wordpress.com/2017/11/20/hydrogen-sulphide-h2s/

 

https://kishorekaruppaswamy.wordpress.com/2017/12/17/hazardous-area-classification/

 

https://atomic-temporary-28241129.wpcomstaging.com/2012/09/30/basic-instrumentation-and-calibration/

 

20 thoughts on “Chemical Hazard Pictograms”

  1. Pingback: Hazardous area classification | Kishore Karuppaswamy

  2. Pingback: Hydrogen Sulphide H2S | Kishore Karuppaswamy

  3. Pingback: Safety Integrity Level (SIL) | Kishore Karuppaswamy

  4. Pingback: Ingress protection | Kishore Karuppaswamy

  5. Pingback: My Posts till now | Kishore Karuppaswamy

  6. Pingback: All my posts till now | Kishore Karuppaswamy

  7. Pingback: Calibration of Temperature transmitter zero trimming | Kishore Karuppaswamy

  8. Pingback: Instrumentation Cable design specification | Kishore Karuppaswamy

  9. Pingback: Acceptable accuracy ranges of Instruments | Kishore Karuppaswamy

  10. Pingback: Standard Power supply requirements for Instrumentation devices | Kishore Karuppaswamy

  11. Pingback: AK ENCON ENGINEERING SERVICES | Kishore Karuppaswamy

  12. Pingback: Bastard Esterraj Stephen and MC GSN Raju | Kishore Karuppaswamy

  13. Pingback: General design requirements of Instrumentation part 5 | Kishore Karuppaswamy

  14. Pingback: All my posts till now | kishore koduvayur

  15. Pingback: AS-i (Actuator sensor-Interface Protocol) | Kishore Karuppaswamy

  16. Pingback: Instrumentation related to a motor driven pump | Kishore Karuppaswamy

  17. Pingback: Flow transmitter DP type | Kishore Karuppaswamy

  18. Pingback: Calibration of siemens sipart PS2 | Kishore Karuppaswamy

  19. Pingback: Ultrasonic flow measurement working principle | Kishore Karuppaswamy

  20. Pingback: Instrumentation engineering | Kishore Karuppaswamy

Leave a comment